LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> MX-5 Miata RF Club >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle (Service Information)) >> Oil Cooler Removal/Installation >> Oil Hose No. 5 and No. 6 Removal/Installation

Oil Hose No. 5 and No. 6 Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front under cover. (See FRONT UNDER COVER REMOVAL/INSTALLATION .)
  2. Remove the oil hose No. 5 and No. 6.
    G14589376Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal. (See OIL HOSE INSTALLATION NOTE .) (See OIL HOSE NO. 5 (RADIATOR SIDE) INSTALLATION NOTE .)
  4. Inspect for oil leakage from the oil pipes and oil hoses.
  5. Inspect the ATF level and condition. (See AUTOMATIC TRANSMISSION FLUID (ATF) INSPECTION .) (See AUTOMATIC TRANSMISSION FLUID (ATF) LEVEL ADJUSTMENT .)