LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Exhaust System (VIN Y)) >> Exhaust System Removal/Installation >> Exhaust System Removal/Installation (AWD) >> Exhaust System Insulator Removal/Installation (AWD)

Exhaust System Insulator Removal/Installation (AWD)

WARNING: This page is about a different variant/trim than selected.
  1. Remove the propeller shaft. (See PROPELLER SHAFT REMOVAL/INSTALLATION ).
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
Fig 1: Exhaust System Insulator Components With Torque Specification (AWD)
G13672623Courtesy of MAZDA MOTORS CORP.
PART SPECIFICATION

1 Insulator (rear)
(See Insulator (rear) removal note (AWD) ).
(See Insulator (rear) installation note (AWD) ).
2 Insulator (middle)
(See Insulator (middle) installation note (AWD) ).
3 Insulator (front)
(See Insulator (front) installation note (AWD) ).
scientia non olet · About LEMON Manuals