Diagnostic Procedure
WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
| Step | Inspection | Action | |
|---|---|---|---|
| 1 | VERIFY AREA AROUND RADIATOR GRILLE ORNAMENT
|
Yes | Return the surfaces of the radiator grille ornament to their normal condition, then go to Step 4. |
| No | Go to the next step. | ||
| 2 | VERIFY AREA AROUND RADAR UNIT
|
Yes | Return the radar unit to their normal condition, then go to Step 4. |
| No | Go to the next step. | ||
| 3 | VERIFY LCD
|
Yes | Switch the ignition off (LOCK), leave it for 30 min to cool down the radar unit, switch the ignition ON (engine off or on) again, and verify the message indicating "SBS, MRCC Radar blocked" in the LCD. "SBS, MRCC Radar blocked" is not displayed
"SBS, MRCC Radar blocked" is displayed
|
| No | Go to the next step. | ||
| 4 | VERIFY THAT REPAIRS HAVE BEEN COMPLETED
|
Yes | Repeat the inspection from Step 1.
Go to the next step. |
| No | Go to the next step. | ||
| 5 | VERIFY THAT NO OTHER DTCs ARE PRESENT
|
Yes | Perform the corresponding DTC inspection. |
| No | DTC troubleshooting completed. | ||