LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2017 >> CX-5 Grand Select, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Exterior Body Panels) >> Fuel-Filler Lid Removal/Installation

Fuel-Filler Lid Removal/Installation

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolts shown in the figure.
    Fig 1: Locating Fuel-Filler Lid Bolt And Fastener
    G11447584Courtesy of MAZDA MOTORS CORP.
  2. Remove the fastener.
  3. Remove the fuel-filler lid.
  4. Install in the reverse order of removal.
  5. Adjust the fuel-filler lid. (See FUEL-FILLER LID ADJUSTMENT .)
scientia non olet · About LEMON Manuals