LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 627 (Body System [Doors And Liftgate]) >> Front Door Checker Removal/Installation

Front Door Checker Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully close the front door glass.
  2. Disconnect the negative battery cable.
  3. Remove the inner garnish. See INNER GARNISH REMOVAL/INSTALLATION .
  4. Remove the front door trim. See FRONT DOOR TRIM REMOVAL/INSTALLATION .
  5. Remove the front door speaker. See FRONT DOOR SPEAKER REMOVAL/INSTALLATION .
  6. Remove the bolt.
    Fig 1: Front Door Checker With Mounting Bolts Torque Specifications
    G06205693Courtesy of MAZDA MOTORS CORP.
  7. Remove the nut.
  8. Pull out the front door checker from the front speaker installation hole.
  9. Install in the reverse order of removal.
Fig 2: Front Door Checker With Mounting Nuts Torque Specifications
G06205694Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals