LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 624 (Seat Belt System) >> Rear Buckle Removal/Installation

Rear Buckle Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat cushion. . REAR SEAT CUSHION REMOVAL/INSTALLATION .
  2. Remove the bolt.
  3. Remove the rear buckle (RH).
  4. Remove the rear buckle (LH). . REAR CENTER SEAT BELT REMOVAL/INSTALLATION .
  5. Install in the reverse order of removal.
    Fig 1: Rear Buckle And Bolt With Torque Specifications
    G06206104Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals