LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (Body System [Body Panels]) >> Cowl Panel Removal/Installation

Cowl Panel Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the windshield wiper arm. See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION )
  2. Remove the front fender molding. See COWL GRILLE REMOVAL/INSTALLATION )
  3. Remove the cowl grille. See COWL GRILLE REMOVAL/INSTALLATION )
  4. Remove the windshield wiper motor. See WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION )
  5. Remove the washer hose grommet from the cowl panel and disconnect the front washer hose.
  6. Remove the bolts, then remove the stay.
    Fig 1: Cowl Panel Mounting Bolts With Torque Specifications
    G06200686Courtesy of MAZDA MOTORS CORP.
  7. Remove bolts.
    Fig 2: Cowl Panel Mounting Bolts With Torque Specifications
    G06200686Courtesy of MAZDA MOTORS CORP.
  8. Set the center cowl grill out of the way in the direction of the arrow to remove the cowl panel.
    Fig 3: Setting Center Cowl Grill
    G06200688Courtesy of MAZDA MOTORS CORP.
  9. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals