LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2012 >> 6 i Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 559 (Information Center [Instrumentation/Driver Info]) >> Horn Removal/Installation

Horn Removal/Installation

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front bumper. See FRONT BUMPER REMOVAL/INSTALLATION .
  3. Remove the washer tank. See WASHER TANK REMOVAL/INSTALLATION .
  4. Disconnect the connectors.
  5. Remove the bolt.
  6. Remove the horn.
  7. Install in the reverse order of removal.
    Fig 1: Identifying Horn, Connectors And Bolt
    G06201220Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals