LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Mechanical (Service Information L3)) >> High-Tension Lead Removal/Installation

High-Tension Lead Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • The high-tension leads must be reinstalled to their original Incorrect installation can damage the leads and cause power loss, and negatively affect the electronic components.
  1. Disconnect the negative battery cable.
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Remove the high-tension leads. See HIGH-TENSION LEAD REMOVAL/INSTALLATION .
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals