Center Instrument Panel Duct Register Removal/Installation
WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the center instrument panel register. See CENTER INSTRUMENT PANEL REGISTER REMOVAL/INSTALLATION .
- Remove the center instrument panel register duct screws then remove the duct.
Tightening Torque
2-3 N.m {20-31 kgf.Cm, 18-26 in.lbf}.
- Install in reverse order of removal.