Pinpoint Test H: DTCs U3003:16 and 17: Notes

WARNING: This page is about a different variant/trim than selected.

Refer to the appropriate wiring diagrams for schematic and connector information:

Refer to MANUAL CLIMATE CONTROL SYSTEM
Refer to AUTOMATIC CLIMATE CONTROL SYSTEM

NOTE: DTC U3003 can be set if the vehicle has been recently jump started, the battery has been recently charged or the battery has been discharged. The battery may become discharged due to excessive load(s) on the charging system from aftermarket accessories or if the battery has been left unattended with the accessories on.

NOTE: Carry out a thorough inspection and verification before proceeding with the pinpoint test. Refer to INSPECTION AND VERIFICATION .