Removal and Installation

Remove the roof opening panel glass. For additional information, refer to Roof Opening Panel Glass .
Remove the trough assembly. For additional information, refer to Trough Assembly .
Slide the roof opening panel shield forward halfway.
Disengage the roof opening panel shield guide feet.
- Lift the front portion of the roof opening panel shield upward at center until able to disengage one of the front guide feet.
Fig 1: Disengaging Front Guide Feet
Courtesy of FORD MOTOR CO.
With one of the guide feet released, carefully rotate the roof opening panel in a clockwise manner to disengage the remaining guide feet.

Fig 2: Rotating Roof Opening Panel In Clockwise Manner
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
- Verify that the roof opening panel glass is centered and aligned before tightening the roof opening panel glass screws. For additional information, refer to Roof Opening Panel Alignment .
- Initialize the roof opening panel motor. For additional information, refer to Roof Opening Panel Motor Initialization .