Section 1 (Transfer Case - Four-Wheel Drive (4WD) System - Diagnostics)
WARNING: This page is about a different variant/trim than selected.
- Specifications
- Description And Operation
- Diagnostic Tests
- Four Wheel Drive (4WD) Systems - All Wheel Drive (AWD)
- Notes
- Principles of Operation
- Inspection and Verification
- DTC Charts
- Symptom Chart - Four Wheel Drive (4WD) System
- Pinpoint Tests
- Pinpoint Test A: All Wheel Drive (AWD) System Functional Test
- Pinpoint Test B: 4X4 Control Module Battery Voltage is High or Low
- Pinpoint Test C: 4X4 Control Module Received No/Invalid Data From ABS Module
- Pinpoint Test D: High-Speed Controller Area Network (HS-CAN) Communications Bus Fault
- Pinpoint Test E: Vehicle Has No or Inadequate Torque at Rear Wheels
- Pinpoint Test F: Vehicle Binds in a Turn or Resists Turning/Pulsates or Shudders in a Straight Line
- Pinpoint Test G: Tire/Axle Out of Acceptable Operating Range
- Four Wheel Drive (4WD) Systems - All Wheel Drive (AWD)
- Removal And Installation