Symptom Tests: Notes
NOTE:
After repair is completed, always clear any Diagnostic Trouble Codes (DTCs) that exist and recheck system for proper operation.
SYMPTOM CHART
| Symptom | Go To Test |
|---|---|
| No Communication With GEM Module | A |
| A Single Gauge Does Not Return To Zero With Key Off | B |
| A Single Gauge Is Inoperative | C |
| Fuel Gauge Inoperative | D |
| Low Fuel Indicator Inoperative | E |
| Voltmeter Inaccurate | F |
| Oil Pressure Gauge Inaccurate | G |
| Temperature Gauge Inaccurate | H |
| Speedometer/Odometer Inoperative | I |
| Speedometer Fluctuates | J |