Replacement [10/2022 - ]: Procedure

Refer to REMOVAL [10/2022 - ]

Refer to PROCEDURE - Step 1

1. Using SST, remove the front drive shaft oil seal LH from the automatic transaxle case sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   • SST: 09308-00010 
   NOTE:

   Do not damage the automatic transaxle case sub-assembly.

1. Using SST, remove the front drive shaft oil seal RH from the transaxle housing.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   • SST: 09308-00010 
   NOTE:

   Be careful not to damage the transaxle housing.

1. Using SST and a hammer, install a new front drive shaft oil seal RH to the transaxle housing.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Depth

   • SST: 09316-10010 
   • SST: 09950-70010 
     1. 09951-07100

   Standard Depth

   -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

   NOTE:

   • Make sure that the outer lip of the front drive shaft oil seal RH is not pinched by SST.

     Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

     *a	Correct
     *b	Incorrect
     *c	Outer Lip

   • Do not allow foreign matter to attach to the inner lip and outer lip of the front drive shaft oil seal RH.
   • Do not install the front drive shaft oil seal RH at an angle.
   • Do not remove the grease from the inner lip and outer lip of the front drive shaft oil seal RH.

1. Using SST and a hammer, install a new front drive shaft oil seal LH to the automatic transaxle case sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Depth

   • SST: 09316-10010 
   • SST: 09950-70010 
     1. 09951-07100

   Standard Depth

   -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

   NOTE:

   • Be sure to install the front drive shaft oil seal LH in the correct direction.
   • Make sure to install the front drive shaft oil seal LH as specified, otherwise malfunctions such as a fluid leak will occur.
   • Do not damage the lip of the front drive shaft oil seal LH.

Refer to PROCEDURE - Step 55

Refer to INSTALLATION [10/2022 - ]