LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2024 >> RC 350 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Intake / Exhaust System (8AR-FTS) - Service Information) >> Radiator >> Installation [11/2017 - ] >> Procedure

Installation [11/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2024 Lexus RC 300, 2023 Lexus RC 300, 2022 Lexus RC 300, 2021 Lexus RC 300, and 2020 Lexus RC 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL INTERCOOLER COOLING RADIATOR ASSEMBLY 

    Refer to PROCEDURE - Step 1 [11/2017 - 09/2020] , or refer to PROCEDURE - Step 1 [09/2020 - ]

  2. INSTALL COOLER CONDENSER ASSEMBLY WITH INTERCOOLER COOLING RADIATOR ASSEMBLY 

    Refer to PROCEDURE - Step 2 [11/2017 - 09/2020] , or refer to PROCEDURE - Step 2 [09/2020 - ]

  3. CONNECT NO. 7 INTERCOOLER COOLING WATER HOSE 

    Refer to PROCEDURE - Step 3 [11/2017 - 09/2020] , or refer to PROCEDURE - Step 3 [09/2020 - ]

  4. CONNECT NO. 1 INTERCOOLER COOLING WATER HOSE 

    Refer to PROCEDURE - Step 4 [11/2017 - 09/2020] , or refer to PROCEDURE - Step 4 [09/2020 - ]

  5. CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE 

    Refer to PROCEDURE - Step 5 [11/2017 - 09/2020] , or refer to PROCEDURE - Step 5 [09/2020 - ]

  6. CONNECT LIQUID TUBE SUB-ASSEMBLY A 

    Refer to PROCEDURE - Step 6 [11/2017 - 09/2020] , or refer to PROCEDURE - Step 6 [09/2020 - ]

  7. INSTALL UPPER RADIATOR SUPPORT 

    Refer to PROCEDURE - Step 5

  8. CONNECT ENGINE ROOM MAIN WIRE 

    Refer to PROCEDURE - Step 9

  9. INSTALL HOOD LOCK ASSEMBLY 

    Refer to PROCEDURE - Step 2 [11/2017 - 11/2019] , or refer to PROCEDURE - Step 2 [11/2019 - ]

  10. CONNECT HOOD LOCK CONTROL CABLE ASSEMBLY 

    Refer to PROCEDURE - Step 11

  11. INSTALL HOOD LOCK RELEASE LEVER PROTECTOR 

    Refer to PROCEDURE - Step 3 [11/2017 - 11/2019] , or refer to PROCEDURE - Step 3 [11/2019 - ]

  12. INSTALL INLET NO. 1 AIR CLEANER 

    Refer to PROCEDURE - Step 79

  13. INSTALL FRONT BUMPER ASSEMBLY 

    Refer to INSTALLATION [11/2017 - 10/2018] , or refer to INSTALLATION [10/2018 - 10/2022] , or refer to INSTALLATION [10/2022 - ]

  14. ADD COOLANT (for Intercooler) 

    See step  2

  15. INSPECT FOR COOLANT LEAK (for Intercooler) 

    See step  3

  16. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT 

    Refer to PROCEDURE - Step 2 [09/2014 - 09/2020] , or refer to PROCEDURE - Step 2 [09/2020 - ]

  17. WARM UP ENGINE 

    Refer to PROCEDURE - Step 3 [09/2014 - 09/2020] , or refer to PROCEDURE - Step 3 [09/2020 - ]

  18. INSPECT FOR REFRIGERANT LEAK 

    Refer to PROCEDURE - Step 4 [09/2014 - 09/2020] , or refer to PROCEDURE - Step 4 [09/2020 - ]

  19. ADJUST HOOD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2

scientia non olet · About LEMON Manuals