LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> NX 450h+ Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> Trip Switch >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH 

    Refer to PROCEDURE - Step 13 [11/2021 - 03/2024] , or refer to PROCEDURE - Step 13 [03/2024 - ]

  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 15 [11/2021 - 03/2024] , or refer to PROCEDURE - Step 15 [03/2024 - ]

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 15 [11/2021 - 03/2024] , or refer to PROCEDURE - Step 15 [03/2024 - ]

  4. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH 

    Refer to PROCEDURE - Step 11

  5. REMOVE NO. 1 INSTRUMENT SIDE PANEL 
    Refer to PROCEDURE - Step 12
  6. REMOVE LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 13

  7. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  8. REMOVE METER HOOD SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 16
  9. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY 
    Refer to PROCEDURE - Step 17
  10. REMOVE TRIP SWITCH 
    1. GTY1068864Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals