LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LX 570 >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (Service Information) >> Oil Pressure Sensor >> Removal [09/2015 - ] >> Procedure

Removal [09/2015 - ]: Procedure

  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 1

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH 

    Refer to PROCEDURE - Step 2

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  4. DRAIN ENGINE OIL 

    See step  1 [09/2015 - 08/2020], or see step  1 [08/2020 - ]

  5. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY 
    1. Disconnect the sender gauge connector.
      GTY593084Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the oil pressure sender gauge.
      GTY571679Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals