Installation [01/2017 - 05/2023]: Procedure

INSTALL LIGHT CONTROL RHEOSTAT (TRIP SWITCH)

Attach the claws to install the light control rheostat (trip switch).

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Refer to PROCEDURE - Step 25 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 25 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 25 [04/2020 - 05/2023]
INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 26 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 26 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 26 [04/2020 - 05/2023]
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 30 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 30 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 30 [04/2020 - 05/2023]
INSTALL FRONT DOOR NO. 2 OPENING TRIM COVER LH
Refer to PROCEDURE - Step 31 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 31 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 31 [04/2020 - 05/2023]
INSTALL FRONT DOOR OPENING TRIM COVER LH
Refer to PROCEDURE - Step 33 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 33 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 33 [04/2020 - 05/2023]
INSTALL FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 35 [01/2017 - 06/2019] , or refer to PROCEDURE - Step 35 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 35 [04/2020 - 05/2023]
INSTALL BOX PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 6
INSTALL UPPER CONSOLE BOX
Refer to PROCEDURE - Step 6
INSTALL SHIFTING HOLE COVER ASSEMBLY
Refer to PROCEDURE - Step 9
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Refer to INSTALLATION [01/2017 - ]
INSTALL RADIO REMOTE TUNING SWITCH ASSEMBLY
Refer to PROCEDURE - Step 4
INSTALL REAR CONSOLE BOX POCKET
Refer to PROCEDURE - Step 5