Removal [09/2022 - ]: Procedure
- REMOVE REAR SEAT ASSEMBLY
Refer to REMOVAL [09/2022 - ]
- REMOVE REAR DOOR SCUFF PLATE LH (for HV Model)
Refer to PROCEDURE - Step 9
- REMOVE REAR DOOR SCUFF PLATE LH (for Gasoline Model)
Refer to PROCEDURE - Step 8
- REMOVE REAR DOOR SCUFF PLATE RH (for HV Model)
HINT:
Use the same procedure as for the LH side.
- REMOVE REAR DOOR SCUFF PLATE RH (for Gasoline Model)
HINT:
Use the same procedure as for the LH side.
- REMOVE REAR SEAT SIDE GARNISH LH
Refer to PROCEDURE - Step 19
- REMOVE REAR SEAT SIDE GARNISH RH
HINT:
Use the same procedure as for the LH side.
- REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH
Refer to PROCEDURE - Step 20
- REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
- DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH
- DISCONNECT REAR SEAT OUTER BELT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
- REMOVE CENTER STOP LIGHT SET (w/o Rear Sunshade)
Refer to PROCEDURE - Step 1
- REMOVE REAR SEAT SHOULDER BELT COVER
- REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER
- REMOVE CENTER CHILD RESTRAINT SEAT TETHER ANCHOR COVER (w/o Center Bracket)
- REMOVE CENTER CHILD RESTRAINT SEAT TETHER ANCHOR COVER (w/ Center Bracket)
- REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)
- REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)
- REMOVE REAR SEAT OUTER BELT ASSEMBLY LH
- Disengage the clamp.
*a Protective Tape *b Locking Button *c Release - Using a screwdriver, pull out the locking button as shown in the illustration to release the lock and disconnect the pretensioner connector.
HINT:
Tape the screwdriver tip before use.
- Remove the 2 bolts.
- Disengage the guide to remove the rear seat outer belt assembly LH.
- Disengage the clamp.
- REMOVE REAR SEAT OUTER BELT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
- REMOVE REAR SEAT BELT RETRACTOR COVER LH
- REMOVE REAR SEAT BELT RETRACTOR COVER RH
HINT:
Use the same procedure as for the LH side.