Removal [10/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY
Refer to PROCEDURE - Step 6 [10/2018 - 07/2022] Refer to PROCEDURE - Step 5 [07/2022 - ]
REMOVE REAR SEAT CUSHION LOCK HOOK
Refer to PROCEDURE - Step 9 [10/2018 - 07/2022] Refer to PROCEDURE - Step 8 [07/2022 - ]
REMOVE REAR DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 28 [10/2018 - 10/2020] Refer to PROCEDURE - Step 28 [10/2020 - 07/2022] Refer to PROCEDURE - Step 26 [07/2022 - ]
REMOVE REAR UNDER SIDE COVER LH
Refer to PROCEDURE - Step 30 [10/2018 - 10/2020] Refer to PROCEDURE - Step 30 [10/2020 - 07/2022] Refer to PROCEDURE - Step 28 [07/2022 - ]
REMOVE REAR DOOR SCUFF PLATE RH
HINT:

Use the same procedure as for the LH side.

Refer to PROCEDURE - Step 29 [10/2018 - 10/2020] Refer to PROCEDURE - Step 29 [10/2020 - 07/2022] Refer to PROCEDURE - Step 27 [07/2022 - ]
REMOVE REAR UNDER SIDE COVER RH
HINT:

Use the same procedure as for the LH side.

Refer to PROCEDURE - Step 31 [10/2018 - 10/2020] Refer to PROCEDURE - Step 31 [10/2020 - 07/2022] Refer to PROCEDURE - Step 29 [07/2022 - ]
REMOVE REAR UNDER COVER
See step 14 See step 14
REMOVE REAR SEAT CUSHION LEG SUB-ASSEMBLY
See step 15 See step 15

REMOVE BATTERY COOLING BLOWER ASSEMBLY

Disconnect the battery cooling blower assembly connector.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Disengage the 2 clamps.

Remove the 3 bolts.

Disengage the 2 claws to remove the battery cooling blower assembly.
NOTE:
- Be sure not to touch the fan part of the battery cooling blower assembly.
- Do not lift the battery cooling blower assembly using the wire harness.