LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Service Information) (1 Of 2) >> Hood Lock Control Cable Assembly >> Removal [07/2022 - ] >> Procedure

Removal [07/2022 - ]: Procedure

  1. REMOVE FRONT WHEEL LH 

    Refer to REMOVAL [10/2018 - ]

  2. REMOVE HEADLIGHT ASSEMBLY LH 
  3. REMOVE HIGH PITCHED HORN ASSEMBLY 

    Refer to PROCEDURE - Step 2

  4. REMOVE LOW PITCHED HORN ASSEMBLY 

    Refer to PROCEDURE - Step 3

  5. REMOVE NO. 1 RADIATOR TO SUPPORT SEAL 

    Refer to PROCEDURE - Step 11

  6. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH 
    1. Remove the 2 screws, 11 clips and front fender splash shield sub-assembly LH.
      GTY831036Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE NO. 1 AIR CLEANER INLET 

    Refer to PROCEDURE - Step 12

  8. REMOVE HOOD LOCK ASSEMBLY 
    1. Disconnect the connector and disengage the guide.
      GTY792193Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 bolts.
      GTY792195Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the guide to remove the hood lock assembly from the hood lock control cable assembly.
      GTY792264Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11

  10. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 
    1. Disengage the guide to remove the hood lock control lever sub-assembly from the hood lock control cable assembly.
      GTY792150Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY 
    1. Disengage the clamps and grommet to remove the hood lock control cable assembly.
      GTY810405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Grommet - -
scientia non olet · About LEMON Manuals