Removal [08/2019 - ]: Procedure

REMOVE TONNEAU COVER ASSEMBLY (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 1
REMOVE DECK BOARD ASSEMBLY (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 2
REMOVE REAR NO. 3 FLOOR BOARD (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 3
REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 4
REMOVE REAR NO. 4 FLOOR BOARD (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 5
REMOVE FRONT DECK FLOOR BOX (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 6
REMOVE DECK SIDE TRIM BOX RH (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 7
REMOVE REAR FLOOR FINISH PLATE (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 8
REMOVE REAR DOOR SCUFF PLATE LH (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 11
REMOVE REAR SEAT ASSEMBLY LH (w/o Rear No. 2 Seat)
Refer to REMOVAL [08/2019 - ]
REMOVE UPPER QUARTER TRIM PAD LH (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 23
REMOVE REAR SEAT SIDE GARNISH LH (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 24
REMOVE REAR FLOOR FINISH SIDE PLATE LH (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 25
REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 26
REMOVE ROPE HOOK ASSEMBLY (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 27
REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 1
REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 29
REMOVE FUEL PUMP CONTROL ECU ASSEMBLY (w/o Rear No. 2 Seat)
w/ Woofer:

Refer to PROCEDURE - Step 5
REMOVE NO. 2 DECK BOARD REINFORCEMENT (w/o Rear No. 2 Seat)
w/ Woofer:

Refer to PROCEDURE - Step 19
REMOVE REAR NO. 1 SPEAKER BRACKET (w/o Rear No. 2 Seat)
w/ Woofer:

Refer to PROCEDURE - Step 20
REMOVE REAR NO. 3 SPEAKER ASSEMBLY (w/o Rear No. 2 Seat)
w/ Woofer:

Refer to PROCEDURE - Step 21
REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)
Refer to REMOVAL [12/2017 - ]
REMOVE REAR DOOR SCUFF PLATE LH (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 12
REMOVE REAR DOOR INSIDE SCUFF PLATE LH (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 13
REMOVE REAR SEAT OUTER TRACK BRACKET COVER LH (w/ Rear No. 2 Seat)
for 60/40 Split Seat Type:

Refer to PROCEDURE - Step 6

for Captain Seat Type:

Refer to PROCEDURE - Step 6
REMOVE FRONT DECK SIDE TRIM COVER LH (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 28
REMOVE REAR SEAT SIDE GARNISH LH (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 29
REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/ Rear No. 2 Seat)
for LH Side:

Refer to PROCEDURE - Step 26
REMOVE ROPE HOOK ASSEMBLY (w/ Rear No. 2 Seat)
for LH Side:

Refer to PROCEDURE - Step 31
REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (w/ Rear No. 2 Seat)
for LH Side:

Refer to PROCEDURE - Step 1
REMOVE NO. 2 AIR CONDITIONING CONTROL ASSEMBLY (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 1
REMOVE COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 1
REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 35

REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY

Disengage the clamp.

Disengage the claw.
Disconnect the connector to remove the fuel lid lock with motor assembly.