Removal [12/2017 - ]: Procedure

REMOVE BACK WINDOW UPPER PANEL TRIM (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 1 [12/2017 - 08/2019] Refer to PROCEDURE - Step 1 [08/2019 - ]
REMOVE BACK WINDOW UPPER PANEL TRIM (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 2 [12/2017 - 08/2019] Refer to PROCEDURE - Step 2 [08/2019 - ]
REMOVE BACK DOOR TRIM COVER LH (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 3 [12/2017 - 08/2019] Refer to PROCEDURE - Step 3 [08/2019 - ]
REMOVE BACK DOOR TRIM COVER LH (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 4 [12/2017 - 08/2019] Refer to PROCEDURE - Step 4 [08/2019 - ]
REMOVE BACK DOOR TRIM COVER RH
HINT:

Use the same procedure as for the LH side.
REMOVE BACK DOOR LOCK COVER (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 6 [12/2017 - 08/2019] Refer to PROCEDURE - Step 6 [08/2019 - ]
REMOVE BACK DOOR LOCK COVER (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 7 [12/2017 - 08/2019] Refer to PROCEDURE - Step 7 [08/2019 - ]
REMOVE BACK DOOR TRIM BASE
Refer to PROCEDURE - Step 8 [12/2017 - 08/2019] Refer to PROCEDURE - Step 8 [08/2019 - ]
REMOVE DOOR PULL HANDLE
Refer to PROCEDURE - Step 9 [12/2017 - 08/2019] Refer to PROCEDURE - Step 9 [08/2019 - ]
REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Refer to PROCEDURE - Step 3 [12/2017 - 08/2019] Refer to PROCEDURE - Step 3 [08/2019 - ]
REMOVE BACK DOOR TRIM PANEL ASSEMBLY (w/o Rear No. 2 Seat)
Refer to PROCEDURE - Step 11 [12/2017 - 08/2019] Refer to PROCEDURE - Step 11 [08/2019 - ]
REMOVE BACK DOOR TRIM PANEL ASSEMBLY (w/ Rear No. 2 Seat)
Refer to PROCEDURE - Step 12 [12/2017 - 08/2019] Refer to PROCEDURE - Step 12 [08/2019 - ]

REMOVE BACK DOOR LOCK ASSEMBLY

Disconnect the connector.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove in this Direction

Disengage the clamp.
Remove the 4 bolts.
Disengage the clip to remove the back door lock assembly as shown in the illustration.