Removal [10/2017 - 10/2020]: Procedure

Refer to PROCEDURE - Step 3

Refer to PROCEDURE - Step 4

Refer to PROCEDURE - Step 14 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 14 [09/2018 - 10/2020]

Refer to PROCEDURE - Step 21 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 21 [09/2018 - 10/2020]

Refer to PROCEDURE - Step 16 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 16 [09/2018 - 10/2020]

Refer to PROCEDURE - Step 20 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 20 [09/2018 - 10/2020]

Refer to PROCEDURE - Step 23 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 23 [09/2018 - 10/2020]

1. Remove the 2 bolts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Hold area 1 shown in the illustration and move it toward the rear of the vehicle to detach the clip.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Place Hands Here

   Remove in this Direction

   NOTE:

   If excessive force is applied to the multi-display assembly, it may become damaged

   HINT: 

   The top area of the instrument panel (a) can be easily detached by lifting it up slightly from the bottom as shown in the illustration.

3. While pulling towards the rear of the vehicle, detach the clip in the order shown in the illustration.
   Fig 1: Multi-Display Assembly Claw Loosening Sequence

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   -

   -

   NOTE:

   If excessive force is applied to the multi-display assembly, it may become damaged.

4. Incline the multi-display assembly as shown in the illustration and remove it

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   -

   -

   NOTE:

   If excessive force is applied to the multi-display it may become damaged.

5. Detach the 2 clamps, disconnect each connector and remove the multi-display assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002