LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Vehicle Proximity Notification System - Service Information >> Vehicle Approaching Speaker Ecu >> Removal [10/2017 - 09/2019] >> Procedure

Removal [10/2017 - 09/2019]: Procedure

  1. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 3

  2. REMOVE INSTRUMENT SIDE PANEL RH 

    Refer to PROCEDURE - Step 4

  3. REMOVE LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 14 [09/2018 - 10/2020]

  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 21 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 21 [09/2018 - 10/2020]

  5. REMOVE VEHICLE APPROACHING SPEAKER CONTROLLER 
    1. Remove the 2 screws.
      GTY827100Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the guide and remove the vehicle approaching speaker controller.
      NOTE:
      • When removing the vehicle approaching speaker controller, take care not to damage it.
      • Do not reuse a vehicle approaching speaker controller that has been dropped or subjected to a strong shock.