LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> NX 300h >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display System (Service Information) >> Clock >> Removal [09/2017 - ] >> Procedure

Removal [09/2017 - ]: Procedure

  1. REMOVE CONSOLE ARMREST ASSEMBLY 

    Refer to PROCEDURE - Step 8 [09/2017 - 05/2019], or refer to PROCEDURE - Step 8 [05/2019 - ]

  2. REMOVE UPPER REAR CONSOLE PANEL 

    Refer to PROCEDURE - Step 9 [09/2017 - 05/2019], or refer to PROCEDURE - Step 9 [05/2019 - ]

  3. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH 

    Refer to PROCEDURE - Step 10 [09/2017 - 05/2019], or refer to PROCEDURE - Step 10 [05/2019 - ]

  4. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH 

    Refer to PROCEDURE - Step 11 [09/2017 - 05/2019], or refer to PROCEDURE - Step 11 [05/2019 - ]

  5. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 12 [09/2017 - 05/2019], or refer to PROCEDURE - Step 12 [05/2019 - ]

  6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 13 [09/2017 - 05/2019], or refer to PROCEDURE - Step 13 [05/2019 - ]

  7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14 [09/2017 - 05/2019], or refer to PROCEDURE - Step 14 [05/2019 - ]

  8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 15 [09/2017 - 05/2019], or refer to PROCEDURE - Step 15 [05/2019 - ]

  9. REMOVE NO. 1 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 16 [09/2017 - 05/2019], or refer to PROCEDURE - Step 16 [05/2019 - ]

  10. REMOVE INSTRUMENT SIDE PANEL RH 

    Refer to PROCEDURE - Step 17 [09/2017 - 05/2019], or refer to PROCEDURE - Step 17 [05/2019 - ]

  11. REMOVE NO. 2 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 18 [09/2017 - 05/2019], or refer to PROCEDURE - Step 18 [05/2019 - ]

  12. REMOVE INSTRUMENT PANEL FINISH PLATE 

    Refer to PROCEDURE - Step 19 [09/2017 - 05/2019], or refer to PROCEDURE - Step 19 [05/2019 - ]

  13. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET 

    Refer to PROCEDURE - Step 8 [09/2017 - 05/2019], or refer to PROCEDURE - Step 10 [05/2019 - ]

  14. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 21 [09/2017 - 05/2019], or refer to PROCEDURE - Step 21 [05/2019 - ]

  15. REMOVE AIR CONDITIONING CONTROL ASSEMBLY 
    1. Pull the air conditioning control assembly in the direction indicated by the arrows shown in the illustration to detach the 6 clips.
      GTY832363Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connectors and remove the air conditioning control assembly.
  16. REMOVE CLOCK ASSEMBLY 
    1. Insert a thin-bladed screwdriver with its tip wrapped with protective tape at the position shown in the illustration, detach the 2 claws and remove the clock assembly.
      GTY962852Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
scientia non olet · About LEMON Manuals