LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> RX 400h FWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting >> Headlight Leveling Ecu >> Installation

Headlight Leveling Ecu: Installation

  1. INSTALL HEADLIGHT LEVELING ECU 
    1. Install the headlight leveling ECU with the nut.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

    2. Connect the connector.
    Fig 1: Locating Headlight Leveling ECU And Nut
    G05274021Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER  (See INSTALLATION )
  3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH  (See INSTALLATION )
  4. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. PERFORM INITIALIZATION 

    (See INITIALIZATION )

scientia non olet · About LEMON Manuals