Luggage Compartment Door: Adjustment

HINT:

• Centering bolts are used to mount the door hinge to the vehicle body and door The door cannot be adjusted with the centering bolts on Substitute the centering bolts with standard bolts (with washers) when making adjustments.
• A bolt without a torque specification is shown in the standard bolt chart (See SPECIFIED TORQUE FOR STANDARD BOLTS )
  Fig 1: Identifying Centering Bolt And Standard Bolt

  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See REMOVAL )
2. REMOVE LUGGAGE LOCK CONTROL CABLE PLATE  (See REMOVAL )
3. REMOVE LUGGAGE COMPARTMENT DOOR INSIDE HANDLE  (See REMOVAL )
4. REMOVE LUGGAGE COMPARTMENT DOOR COVER  (See REMOVAL )
5. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER 
6. REMOVE DECK SIDE TRIM BOX LH 
7. REMOVE DECK SIDE TRIM BOX RH 
8. REMOVE ROPE HOOK ASSEMBLY 
   1. Remove the 2 bolts and 2 rope hook assemblies.
   Fig 2: Identifying Rope Hook Assemblies And Bolts
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
9. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER  (See REMOVAL )
10. ADJUST LUGGAGE COMPARTMENT DOOR 
    1. Horizontally and vertically adjust the door by loosening the door side hinge bolts.

       Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

       Fig 3: Identifying Door Side Hinge Bolts

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic hammer.
    3. Tighten the striker mounting screws after the adjustment.

       Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

       Fig 4: Adjusting Striker Mounting Screws

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
11. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER  (See INSTALLATION )
12. INSTALL ROPE HOOK ASSEMBLY 
    1. Install the 2 rope hook assemblies with the 2 bolts
       Fig 5: Identifying Rope Hook Assemblies And Bolts

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
13. INSTALL DECK SIDE TRIM BOX LH 
14. INSTALL DECK SIDE TRIM BOX RH 
15. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER 
16. INSTALL LUGGAGE COMPARTMENT DOOR COVER  (See INSTALLATION )
17. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE  (See INSTALLATION )
18. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE  (See INSTALLATION )
19. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See INSTALLATION )