LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Lighting (Interior)) >> Back Door Courtesy Switch >> Installation

Back Door Courtesy Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY 
    1. Install the luggage compartment door lock assembly with the 2 bolts

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Engage the clamp.
    3. Connect the connector.
      Fig 1: Identifying Luggage Compartment Door Lock Assembly With Bolts
      G05754290Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY  (See REASSEMBLY )
  3. INSTALL LUGGAGE COMPARTMENT DOOR REINFORCEMENT  (See INSTALLATION )
  4. INSTALL LUGGAGE COMPARTMENT DOOR COVER  (See INSTALLATION )
  5. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE  (See INSTALLATION )
  6. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE  (See INSTALLATION )
  7. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See INSTALLATION )
scientia non olet · About LEMON Manuals