Front Blower Motor: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL COOLING UNIT WITH FAN MOTOR SUB-ASSEMBLY
1. Install the cooling unit with fan motor sub-assembly with the 3 screws.
2. Connect the connector.
  
  Fig 1: Locating Cooling Unit With Fan Motor Sub-Assembly With Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SKID CONTROL ECU (See INSTALLATION )
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL SIDE INSTRUMENT PANEL RH (See INSTALLATION )
INSTALL FRONT DOOR OPENING TRIM COVER RH
HINT.

Use the same procedure for the RH side and LH side (See INSTALLATION ).
INSTALL FRONT DOOR SCUFF PLATE RH
HINT:

Use the same procedure for the RH side and LH side (See INSTALLATION ).