Air Conditioning Amplifier: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (See PRECAUTION ).

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE FRONT DOOR SCUFF PLATE RH
HINT

Use the same procedure for the RH side and LH side (See REMOVAL )
REMOVE FRONT DOOR OPENING TRIM COVER RH
HINT:

Use the same procedure for the RH side and LH side (See REMOVAL ).
REMOVE SIDE INSTRUMENT PANEL RH (See REMOVAL )
REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See REMOVAL )
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See REMOVAL )
REMOVE NO. 2 AIR DUCT
1. Remove the screw and No 2 air duct.
  
  Fig 1: Identifying No. 2 Air Duct Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
1. Disconnect the connector
2. Remove the screw and air conditioning amplifier assembly
  
  Fig 2: Locating Air Conditioning Amplifier Assembly Screw And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002