LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transaxle) >> Air Cooled Oil Cooler >> Removal

Air Cooled Oil Cooler: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 2 ENGINE UNDER COVER 
  2. DRAIN AUTOMATIC TRANSMISSION FLUID  (See REMOVAL  )
  3. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  4. SEPARATE HIGH PITCHED HORN  (See REMOVAL )
  5. REMOVE RADIATOR GRILLE PROTECTOR  (See REMOVAL )
  6. REMOVE FRONT BUMPER ASSEMBLY  (See REMOVAL )
  7. REMOVE OIL COOLER ASSEMBLY 
    1. Disconnect the 2 oil cooler hoses from the oil cooler assembly.
    2. Remove the 3 bolts and oil cooler assembly from the oil cooler bracket
      Fig 1: Locating Oil Cooler Assembly Bolts
      G05750913Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals