LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Horn) >> High Pitched Horn >> Removal

High Pitched Horn: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE HIGH PITCHED HORN ASSEMBLY 
    1. Disconnect the connector
    2. Remove the bolt and high pitched horn assembly.
      Fig 1: Locating High Pitched Horn Assembly Bolt
      G05756665Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals