LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Lighting (Exterior)) >> AFS Ecu >> Removal

AFS Ecu: Removal

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  4. REMOVE AFS ECU 
    1. Disengage the 2 clips and disconnect the connector holder.
      Fig 1: Identifying AFS ECU Connector Clips
      G05756634Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and nut.
      Fig 2: Identifying Bolt And Nut
      G05320586Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the connectors.
    4. Disengage the clamp and remove the AFS ECU
      Fig 3: Locating AFS ECU Connector
      G05756636Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002