LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> IS 250 RWD, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Instrument Panel Safety Pad >> Disassembly

Instrument Panel Safety Pad: Disassembly

  1. REMOVE NO. 1 HEATER TO REGISTER DUCT 
    1. Remove the 3 screws < F > and the No. 1 heater to register duct.
      Fig 1: Identifying No. 1 Heater To Register Duct Screws
      G05755542Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE NO. 3 HEATER TO REGISTER DUCT 
    1. Remove the 3 screws < F > and the No. 3 heater to register duct.
      Fig 2: Identifying No. 3 Heater To Register Duct Screws
      G05755543Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT 
    1. Remove the screw < F > and the side No. 1 defroster nozzle duct.
      Fig 3: Identifying Side No. 1 Defroster Nozzle Duct Screw
      G05755544Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT 
    1. Remove the screw < F > and the side No. 2 defroster nozzle duct.
      Fig 4: Identifying Side No. 2 Defroster Nozzle Duct Screw
      G05755564Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE DEFROSTER NOZZLE ASSEMBLY 
    1. Remove the 3 screws < F > and the defroster nozzle assembly.
      Fig 5: Identifying Defroster Nozzle Assembly Screws
      G05755546Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE NO. 2 HEATER TO REGISTER DUCT 
    1. Remove the 4 screws < F > and the No. 2 heater to register duct.
      Fig 6: Locating No. 2 Heater To Register Duct Screws
      G05755547Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE SIDE DEFROSTER NOZZLE 
    1. Disengage the 4 claws and remove the side defroster nozzle.
    2. Fig 7: Identifying Side Defroster Nozzle Claws
      G05755548Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE NAVIGATION ANTENNA  (See REMOVAL )
  10. REMOVE NO. 2 INSTRUMENT PANEL WIRE 
    1. Disconnect the connector.
    2. Disengage the 5 clamps and remove the No. 2 instrument panel wire.
    3. Fig 8: Identifying No. 2 Instrument Panel Wire Clamps
      G05832988Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY  (See REMOVAL )
  12. REMOVE DEFROSTER NOZZLE GARNISH 
    1. Disengage the 8 claws and 2 clips, and then remove the defroster nozzle garnish.
      Fig 9: Identifying Defroster Nozzle Garnish Claws And Clips
      G05755550Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE AUTOMATIC LIGHT CONTROL SENSOR 
    1. Disengage the 2 claws and remove the automatic light control sensor.
      Fig 10: Removing Automatic Light Control Sensor
      G05755551Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE ENGINE SWITCH 
    1. Disengage the 2 claws and remove the engine switch.
  15. REMOVE INSTRUMENT PANEL SPACER