LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> GS 460 >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Starting (2GR-FSE)) >> Engine Switch >> Removal

Engine Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH  (See REMOVAL )
  3. REMOVE FRONT CONSOLE UPPER PANEL ASSEMBLY  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  5. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  6. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  7. REMOVE INSTRUMENT SIDE PANEL LH  (See REMOVAL )
  8. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See REMOVAL )
  10. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  11. REMOVE ENGINE SWITCH 
    1. Disconnect the switch connector.
    2. Detach the 2 claws and remove the switch.
scientia non olet · About LEMON Manuals