LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> GS 460 >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting (1UR-FSE) >> Engine Switch >> Removal

Engine Switch: Removal

  1. PRECAUTION 

    (See PRECAUTION )

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  3. REMOVE FRONT CONSOLE UPPER PANEL GARNISH  (See REMOVAL )
  4. REMOVE CONSOLE UPPER PANEL ASSEMBLY  (See REMOVAL )
  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  6. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  7. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  8. REMOVE INSTRUMENT SIDE PANEL LH  (See REMOVAL )
  9. REMOVE INSTRUMENT PANEL NO. 1 UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  10. REMOVE INSTRUMENT PANEL NO. 1 SAFETY PAD SUB-ASSEMBLY  (See REMOVAL )
  11. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See REMOVAL )
  12. REMOVE ENGINE SWITCH 
    1. Disconnect the switch connector.
    2. Detach the 2 claws and remove the switch.
scientia non olet · About LEMON Manuals