SEAT CLIMATE CONTROL SWITCH (for Rear Side): Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL CURTAIN SWITCH ASSEMBLY (for Power Seat) (See  REASSEMBLY  ) 
2. INSTALL REAR NO. 1 SEAT CENTER ARMREST PANEL (for Power Seat) (See  REASSEMBLY  ) 
3. INSTALL REAR SEAT ARMREST ASSEMBLY CENTER (for Power Seat) (See  REASSEMBLY  ) 
4. INSTALL REAR SEATBACK ASSEMBLY CENTER (for Power Seat) (See  INSTALLATION  ) 
5. INSTALL REAR SEAT CUSHION ASSEMBLY CENTER (for Power Seat) (See  INSTALLATION  )