REAR SEATBACK HEATER (for Power Seat): Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL REAR SEATBACK COVER SUB-ASSEMBLY RH (See  REASSEMBLY  ) 
2. INSTALL SEATBACK COVER WITH PAD RH (See  REASSEMBLY  ) 
3. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY RH (See  REASSEMBLY  ) 
4. INSTALL SEAT CLIMATE CONTROL ECU RH (See  REASSEMBLY  ) 
5. INSTALL POSITION CONTROL ECU RH (See  REASSEMBLY  ) 
6. INSTALL REAR SEAT HEADREST SUPPORT RH (See  REASSEMBLY  ) 
7. INSTALL REAR SEAT HEADREST ASSEMBLY RH (See  REASSEMBLY  ) 
8. INSTALL REAR SEAT SHOULDER BELT GUIDE RH (See  REASSEMBLY  ) 
9. INSTALL REAR SEATBACK COVER SUB-ASSEMBLY LH (See  REASSEMBLY  ) 
10. INSTALL SEATBACK COVER WITH PAD LH (See  REASSEMBLY  ) 
11. INSTALL REAR SEAT NO. 1 HEADREST ADJUSTER SUB-ASSEMBLY LH (See  REASSEMBLY  ) 
12. INSTALL SEAT CLIMATE CONTROL ECU LH (See  REASSEMBLY  ) 
13. INSTALL POSITION CONTROL ECU LH (See  REASSEMBLY  ) 
14. INSTALL REAR SEAT HEADREST SUPPORT LH (See  REASSEMBLY  ) 
15. INSTALL REAR SEAT HEADREST ASSEMBLY LH (See  REASSEMBLY  ) 
16. INSTALL REAR SEAT SHOULDER BELT GUIDE LH (See  REASSEMBLY  ) 
17. INSTALL REAR SEATBACK ASSEMBLY RH (See  INSTALLATION  ) 
18. INSTALL REAR SEATBACK ASSEMBLY LH (See  INSTALLATION  ) 
19. INSTALL REAR SEAT CUSHION ASSEMBLY RH (See  INSTALLATION  ) 
20. INSTALL REAR SEAT CUSHION ASSEMBLY LH (See  INSTALLATION  ) 
21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
22. INSTALL COWL TOP VENTILATOR LOUVER  (See INSTALLATION )
23. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
       NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
24. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).