Instrument Panel Safety Pad: Disassembly

REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT
1. Remove the screw and duct.
  
  Fig 1: Identifying Side No. 1 Defroster Nozzle Duct Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT
1. Remove the screw and duct.
  
  Fig 2: Identifying Side No. 2 Defroster Nozzle Duct Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DEFROSTER NOZZLE ASSEMBLY
1. Remove the 3 screws and nozzle.
  
  Fig 3: Identifying Defroster Nozzle Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 3 HEATER TO REGISTER DUCT
1. Remove the 3 screws and duct.
  
  Fig 4: Identifying No. 3 Heater To Register Duct Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 HEATER TO REGISTER DUCT
1. Remove the 3 screws and duct.
  
  Fig 5: Identifying No. 1 Heater To Register Duct Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 HEATER TO REGISTER DUCT
1. Remove the 4 screws and duct.
  
  Fig 6: Identifying No. 2 Heater To Register Duct Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
1. Using a screwdriver, detach the 4 claws.
  HINT:
  
  Tape the screwdriver tip before use.
2. Using a screwdriver, detach the 6 clips and remove the register.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 7: Identifying No. 2 Instrument Panel Register Claws And Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
1. Using a screwdriver, detach the 8 claws and remove the register.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 8: Identifying No. 3 Instrument Panel Register Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
1. Using a screwdriver, detach the 6 claws and remove the register.
  HINT:
  
  Tape the screwdriver tip before use.
REMOVE FRONT PASSENGER AIRBAG ASSEMBLY (See REMOVAL )
REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
1. Using a screwdriver, detach the 2 clips and 2 claws.
  HINT:
  
  Tape the screwdriver tip before use.
2. Remove the speaker panel.
  
  Fig 10: Identifying No. 2 Instrument Panel Speaker Panel Clips And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
1. Using a screwdriver, detach the 2 clips and 2 claws.
  HINT:
  
  Tape the screwdriver tip before use.
2. Remove the speaker panel.
  
  Fig 11: Identifying No. 1 Instrument Panel Speaker Panel Clips And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO.1 SPEAKER HOLE COVER
1. Using a screwdriver, detach the 4 clips and remove the speaker panel.
  HINT:
  
  Tape the screwdriver tip before use.
REMOVE FRONT NO. 2 SPEAKER RH (See REMOVAL )
REMOVE FRONT NO. 2 SPEAKER LH (See REMOVAL )
REMOVE FRONT STEREO COMPONENT SPEAKER (See REMOVAL )
REMOVE POWER SWITCH