Instrument Panel Safety Pad: Reassembly

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

INSTALL POWER SWITCH
INSTALL FRONT STEREO COMPONENT SPEAKER (See INSTALLATION )
INSTALL FRONT NO. 2 SPEAKER LH (See INSTALLATION )
INSTALL FRONT NO. 2 SPEAKER RH (See INSTALLATION )
INSTALL NO. 1 SPEAKER HOLE COVER
1. Attach the 4 clips to install the speaker panel.
  
  Fig 1: Identifying No. 1 Speaker Hole Cover Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
1. Attach the 2 claws and 2 clips to install the speaker panel.
  
  Fig 2: Identifying No. 1 Instrument Panel Speaker Panel Claws And Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
1. Attach the 2 claws and 2 clips to install the speaker panel.
INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
1. Attach the 6 claws to install the register.
  
  Fig 4: Identifying No. 1 Instrument Panel Register Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
1. Attach the 8 claws to install the register.
  
  Fig 5: Identifying No. 3 Instrument Panel Register Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
1. Attach the 6 clips and 4 claws to install the register.
  
  Fig 6: Identifying No. 2 Instrument Panel Register Clips And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 HEATER TO REGISTER DUCT
1. Install the duct with the 4 screws.
  
  Fig 7: Identifying No. 2 Heater To Register Duct Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 HEATER TO REGISTER DUCT
1. Install the duct with the 3 screws.
  
  Fig 8: Identifying No. 1 Heater To Register Duct Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 HEATER TO REGISTER DUCT
1. Install the duct with the 3 screws.
  
  Fig 9: Identifying No. 3 Heater To Register Duct Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL DEFROSTER NOZZLE ASSEMBLY
1. Install the duct with the 3 screws.
  
  Fig 10: Identifying Defroster Nozzle Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT
1. Install the duct with the screw.
  
  Fig 11: Identifying Side No. 2 Defroster Nozzle Duct Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT
1. Install the duct with the screw.