Instrument Panel Safety Pad: Reassembly

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL ENGINE SWITCH 
   1. Install the engine switch.

      For 2GR-FE (see INSTALLATION )

      For 3UZ-FE (see INSTALLATION )

2. INSTALL FRONT STEREO COMPONENT SPEAKER (See  INSPECTION  ) 
3. INSTALL FRONT NO. 2 SPEAKER LH (See  INSTALLATION  ) 
4. INSTALL FRONT NO. 2 SPEAKER RH (See  INSTALLATION  ) 
5. INSTALL NO. 1 SPEAKER HOLE COVER 
   1. Attach the 4 clips to install the speaker panel.
   Fig 1: Identifying Clips To Speaker Panel

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. INSTALL INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY 
   1. Attach the 2 claws and 2 clips to install the speaker panel.
   Fig 2: Installing Instrument Panel No. 1 Speaker Panel

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. INSTALL INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY 
   1. Attach the 2 claws and 2 clips to install the speaker panel.
8. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY 
   Fig 3: Installing Front Passenger Airbag

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
9. INSTALL INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY 
   1. Attach the 6 claws to install the register.
   Fig 4: Installing Instrument Panel No. 1 Register

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
10. INSTALL INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY 
    1. Attach the 8 claws to install the register.
    Fig 5: Installing Instrument Panel No. 3 Register

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
11. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY 
    1. Attach the 6 clips and 4 claws to install the register.
    Fig 6: Installing Instrument Panel No. 2 Register

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
12. INSTALL NO. 2 HEATER TO REGISTER DUCT 
    1. Install the duct with the 4 screws.
    Fig 7: Locating Screws And Heater To Register Duct

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
13. INSTALL NO. 1 HEATER TO REGISTER DUCT 
    1. Install the duct with the 3 screws.
    Fig 8: Identifying Heater To Register Duct With Screws

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
14. INSTALL NO. 3 HEATER TO REGISTER DUCT 
    1. Install the duct with the 3 screws.
    Fig 9: Identifying Heater To Register Duct With Screws

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
15. INSTALL DEFROSTER NOZZLE ASSEMBLY 
    1. Install the duct with the 3 screws.
    Fig 10: Identifying Defroster Nozzle And Screws

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
16. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT 
    1. Install the duct with the screw.
    Fig 11: Identifying Defroster Nozzle Duct With Screw

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
17. INSTALL SIDE DEFROSTER NOZZLE DUCT NO. 1 
    1. Install the duct with the screw.
    Fig 12: Identifying Defroster Nozzle Duct With Screw

    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002