LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2007 >> GS 350 RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Instrument Panel Safety Pad >> Disassembly

Instrument Panel Safety Pad: Disassembly

  1. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT 
    1. Remove the screw and duct.
    Fig 1: Identifying Defroster Nozzle Duct With Screw
    G05300374Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT 
    1. Remove the screw and duct.
    Fig 2: Identifying Defroster Nozzle Duct With Screw
    G05300375Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE DEFROSTER NOZZLE ASSEMBLY 
    1. Remove the 3 screws and nozzle.
    Fig 3: Identifying Defroster Nozzle And Screws
    G05300376Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 3 HEATER TO REGISTER DUCT 
    1. Remove the 3 screws and duct.
    Fig 4: Identifying Heater To Register Duct With Screws
    G05300377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE NO. 1 HEATER TO REGISTER DUCT 
    1. Remove the 3 screws and duct.
    Fig 5: Identifying Heater To Register Duct With Screws
    G05300378Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE NO. 2 HEATER TO REGISTER DUCT 
    1. Remove the 4 screws and duct.
    Fig 6: Locating Screws And Heater To Register Duct
    G05300379Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY 
    1. Using a screwdriver, detach the 4 claws.

      HINT:

      Tape the screwdriver tip before use.

    2. Using a screwdriver, detach the 6 clips and remove the register.

      HINT:

      Tape the screwdriver tip before use.

    Fig 7: Removing Instrument Panel No. 2 Register
    G05300380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY 
    1. Using a screwdriver, detach the 2 claws.

      HINT:

      Tape the screwdriver tip before use.

    2. Using a screwdriver, detach the 6 claws and remove the register.

      HINT:

      Tape the screwdriver tip before use.

    Fig 8: Removing Instrument Panel No. 3 Register
    G05300381Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY 
    1. Using a screwdriver, detach the 6 claws and remove the register.
      Fig 9: Identifying Claws And Register
      G05300382Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      Tape the screwdriver tip before use.

      Fig 10: Removing Instrument Panel No. 1 Register
      G05300383Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY (See  INSTALLATION  ) 
  11. REMOVE INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY 
    1. Using a screwdriver, detach the 2 clips and 2 claws.

      HINT:

      Tape the screwdriver tip before use.

    2. Remove the speaker panel.
  12. REMOVE INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY 
    1. Using a screwdriver, detach the 2 clips and 2 claws.

      HINT:

      Tape the screwdriver tip before use.

    2. Remove the speaker panel.
    Fig 11: Removing Instrument Panel No. 1 Speaker Panel
    G05300384Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE NO. 1 SPEAKER HOLE COVER 
    1. Using a screwdriver, detach the 4 clips and remove the speaker panel.
      Fig 12: Identifying Clips And Speaker Panel
      G05300385Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT:

      Tape the screwdriver tip before use.

  14. REMOVE FRONT NO. 2 SPEAKER RH (See  INSPECTION  ) 
  15. REMOVE FRONT NO. 2 SPEAKER LH (See  INSPECTION  ) 
  16. REMOVE FRONT STEREO COMPONENT SPEAKER (See  INSPECTION  ) 
  17. REMOVE ENGINE SWITCH 
    1. Remove the engine switch.

      For 2GR-FSE (see REMOVAL )

      For 3UZ-FE (see REASSEMBLY )

scientia non olet · About LEMON Manuals