LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2006 >> IS 250 RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (A960E)) >> Shift Solenoid Valve >> Installation

Shift Solenoid Valve: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY (See  INSTALLATION   ) 
  2. CONNECT TRANSMISSION WIRE (See  INSTALLATION   ) 
  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY (See  INSTALLATION   ) 
  4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY (See  INSTALLATION   ) 
  5. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY (See  INSTALLATION   ) 
  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  7. ADD AUTOMATIC TRANSMISSION FLUID 

    (See ADJUSTMENT  )

  8. RESET MEMORY 

    (See INITIALIZATION  )

  9. PERFORM INITIALIZATION 

    Some systems need initialization after reconnecting the cable to the negative battery terminal.

    (See INITIALIZATION )

scientia non olet · About LEMON Manuals