License Plate Lamp ASSY: Overhaul

HINT:

COMPONENTS: See COMPONENTS

1. REMOVE BACK DOOR TRIM PANEL ASSY UPPER (See  OVERHAUL  ) 
2. REMOVE BACK DOOR TRIM PANEL ASSY (See  OVERHAUL  ) 
3. REMOVE BACK DOOR GARNISH OUTSIDE (See  REPLACEMENT  ) 
4. REMOVE LICENSE PLATE LAMP ASSY 
   1. Release the 2 claw fittings and disconnect the license plate lamp assy as shown in Fig 1 .
   2. Disconnect the connector and remove the license plate lamp assy.
      Fig 1: Disconnecting License Plate Lamp Assy

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. REMOVE LICENSE PLATE LAMP BULB 
   1. Remove the license plate lamp bulb, the license plate lamp socket and wire.
   2. Remove the license plate lamp bulb from the license plate lamp socket and wire.
6. REMOVE LICENSE PLATE LAMP SOCKET AND WIRE 
7. REMOVE LICENSE PLATE LAMP LENS