Roof Opening Panel Motor (G2059636): Installation
WARNING: This page is about a different car, the 2019 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
-
- Install the roof opening panel motor.
- Tighten the 3 screws.
Torque : 3 Nm
- Connect the roof opening panel motor electrical connector.
- Install the headliner.
Refer to: HEADLINER
- Connect the startup battery.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Perform roof opening panel motor synchronization procedure.
Refer to: MOTOR SYNCHRONIZATION