LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Roof Opening Panel -- Range Rover Velar/L560) >> Roof Opening Panel >> Removal And Installation >> Roof Opening Panel Blind Motor (G2059638) >> Installation

Roof Opening Panel Blind Motor (G2059638): Installation

WARNING: This page is about a different car, the 2019 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure that the opening panel blind pull bar is in the noted position before the blind motor installation.
    • Install the opening panel blind motor.
    • Tighten the 3 screws.

      Torque  : 3 Nm 

    • Connect the blind motor electrical connector.
  2. Install the headliner.

    Refer to: HEADLINER

  3. Connect the startup battery.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

  4. Roof opening panel motor synchronization procedure.

    Refer to: MOTOR SYNCHRONIZATION 

scientia non olet · About LEMON Manuals