Section 26 (Battery Pack Control Module (BPCM) - DTCS P0EDD-00 To P1AE3-00)

• DTC Troubleshooting
  • P0EDD-00-Hybrid/EV Battery Pack B Deterioration
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1614-00-Ecu Reset/Recovery Occurred
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P167B-00-Controlled System Shutdown
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1A01-00-Battery Energy Control Module EEPROM Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1A05-00-Battery Energy Control Module Random Access Memory (Ram)
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1A06-00-Battery Energy Control Module Read Only Memory (ROM)
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1A0C-00-Battery Energy Control Module System Voltage Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1A0D-00-Battery Energy Control Module System Voltage High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1A21-00-HV Battery Contactor Control Sequence Incorrect
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1A29-00-Cell Supervisory Circuit A Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1A9B-00-Hybrid/EV Battery Temperature Sensor 1 Out Of Range High
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • P1AE2-00-Battery Energy Control Module High Voltage System Interlock Circuit
    • High Voltage Warning
    • Theory Of Operation - HVIL Loop
    • Functional Description - HVIL Circuit
    • Check For An Active Or Intermittent Condition
    • Enabling Conditions And Possible Causes-High Voltage Interlock (HVIL)
    • Diagnostic Test - HVIL Loop Using The MOPAR Scope
    • Diagnostic Test - HVIL Loop Using The Scan Tool And MOPAR Scope
    • HV Verification Test
  • P1AE3-00-Battery Energy Control Module High Voltage System Interlock Circuit Low
    • High Voltage Warning
    • Theory Of Operation - HVIL Loop
    • Functional Description - HVIL Circuit
    • Check For An Active Or Intermittent Condition
    • Enabling Conditions And Possible Causes-High Voltage Interlock (HVIL)
    • Diagnostic Test - HVIL Loop Using The MOPAR Scope
    • Diagnostic Test - HVIL Loop Using The Scan Tool And MOPAR Scope
    • HV Verification Test