LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1355 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> Caliper, Disc Brake >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0188683Courtesy of CHRYSLER GROUP, LLC
  1. Install the caliper to the caliper adaptor and tighten both caliper to caliper adaptor bolts (1) to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Install the removed brake hose to the caliper. Refer to TUBES AND HOSES, BRAKE, REMOVAL AND INSTALLATION .
  3. Install the tire and wheel assembly. Refer to INSTALLATION .
  4. Remove the support and lower the vehicle.
  5. Fill and bleed the braking system. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals